Cas
DVTP200(200LPM) Transformer Oil Filtration Machine Sales to Iraq

January 7,2026.

Acore Filtration Co.,Ltd manufacture and sales a set of DVTP200(12000L/H) double stages high vacuum Transformer Oil Filtration Machine to Iraq. The application involves several aspects, including equipment selection, operational precautions, and adaptation to the local environment.

The following is an analysis and recommendations specification of application of Transformer Oil Filtration System to Iraq:
1. Impact of Iraq's Environment:
High-temperature and dry climate: Summer temperatures in Iraq often exceed 45°C, which may accelerate the aging of seals and oil evaporation in transformer oil filter machine. It is necessary to choose equipment made of high-temperature resistant materials and ensure an efficient heat dissipation system.

Dusty environment: Frequent sandstorms can clog filters and cooling systems. Multiple filtration and dust-proof designs are required. We recommend clients choose a weather-proof canopy, which can protect the machine well.

Unstable power supply: In some regions, voltage fluctuates significantly or power outages are frequent. It is recommended to select a Transformer Oil Filtration System with voltage stabilization features or one that supports generator power.

2. Equipment Selection Recommendations
Functional requirements:
Highly efficient removal of impurities and moisture: Transformer oil in Iraq is prone to contamination, so a vacuum transformer oil filtration machine is recommended.
Filtration precision: Recommended ≤1μm.
High temperature resistance: The operating temperature range should be at least 0-50°C, and key components (such as the vacuum pump) need to withstand temperatures above 70°C.

3. Operational and Maintenance Precautions
Pre-operation check:
Clean the outside of the Transformer Oil Filter Machine to prevent dust from entering the oil circuit.
Inspect filters and seals; in high-temperature environments, replace them more frequently.

Operational monitoring:
Closely monitor oil temperature to avoid oxidation caused by high temperatures.
Regularly test the moisture content and dielectric strength of the output oil to ensure filtration effectiveness.

4. Shutdown maintenance:
Replace filters and desiccants in a timely manner; due to frequent sand in Iraq, filters can easily become clogged.
If the transformer oil filtration system will not work for an extended period, drain any residual oil inside to prevent oil sludge from solidifying under high temperatures.

5. Safety and Compliance
Safety regulations:
Wear protective gear during operation to avoid burns from high-temperature parts.
Dispose of used oil and filters in accordance with Iraqi environmental regulations to prevent pollution.
Certification requirements: Ensure the equipment meets the standards of Iraqi petroleum and electricity authorities (local agencies such as the Iraqi Ministry of Electricity can be consulted).

6. Application Scenarios
Substation maintenance: Used for regular purification of transformer oil to extend equipment lifespan.
Post-disaster recovery: After war or natural disasters, transformers may be contaminated, transformer oil filter machine can quickly restore oil quality.
New power plants: During the installation of new transformers, oil can be pre-treated to ensure insulation performance.

When using transformer oil filtration machine in Iraq, focus should be on high-temperature dust protection, power compatibility, and localized maintenance. Choosing durable models suitable for the desert climate and establishing a regular maintenance schedule can effectively ensure stable operation of power grid equipment.

                      

Droit d’auteur © 2026 Acore Filtration Co. Ltd.

Demander un devis

Demander un devis